← Back to all yachts
CRUISERS YACHTS · 1987

Summer Wind

28' 8" (8.74m) ·Motor Yacht ·Madeira Beach, United States
($41,693 AUD est.) $29,292 USD

About this yacht

Why buy New when  this vessel is turn key ready!   With a wide beam, it is great for friends and family!  It has a huge cockpit, flybridge and roomy salon.   The engines are mounted under the cockpit deck and recently been upgraded.  Three steps down is the cabin with dinette and a head on the port side, a galley forward on the starboard side, and a V-berth with hanging locker.  "Summer Wind" has many ENJOYABLE FEATURES, call to schedule a viewing.  

Specifications

Length
28' 8" (8.74m)
Beam
10' 8" (3.25m)
Max Draft
3' 3" (0.99m)
Year built
1987
Builder
CRUISERS YACHTS
Model
298 Villa Vee
Type
Motor Yacht
Cabins
1
Heads
1
Hull material
Fiberglass
Engines
Crusader 5.7/350 V8 0hp 980hrs / Crusader 5.7/350 V8 0hp 1010hrs
Status
Active
MLS ID
395098
Updates +

 

Updated Maintenance (Recent Replacements and Upgrades):

  • Dominic Air Conditioner:

    • Replaced with a new unit.

  • 12 Volt GROCO Head:

    • Replaced with a new 12-volt GROCO head.

  • Seacocks and Strainers:

    • New seacocks and strainers installed.

  • TrueCharge Marine Charger:

    • In compliance with ABYC standards.

  • Safety Equipment:

    • Updated flares.
    • Updated navigation lighting.
    • Updated fire extinguishing system.

  • Additional Equipment:

    • Added extra lines and anchor pump to pump water.

  • Engine Rebuild and Replacement (2020):

    • Completed by DNA Marine Repair, Tarpon Springs, Florida.

    • Port Side Engine:

      • Jasper Limited Nationwide Premium Service Plan 2020.
      • Crusader stud riser (long).
      • Crusader stud riser (short).
      • Crusader exhaust elbow.
      • Crusader 4" riser block.
      • Crusader exhaust manifold.
      • Crusader exhaust riser gasket.
      • Crusader manifold gasket.
      • HTM 500 exhaust 4" hose clamp.

    • Starboard Side Engine:

      • Crusader 4" exhaust riser.
      • Crusader exhaust elbow.
      • Crusader exhaust manifold.
      • Crusader exhaust gasket.
      • Crusader distributor cap and rotor.
      • Crusader fresh water pump.
      • 15 amp fuse and panel screws.
      • AC Delco spark plug.
      • Napa SAE 40 Oil.
      • HTM 500 Exhaust hose clamp.

Note: Approximately 20 hours on the engines since this work has been completed.