Navetta 33
About this yacht
One of the most exceptional semi-displacement motor yachts of its era, Navetta 33 by Custom Line, elegantly unites the renowned external design of Zuccon International Project with a truly habitable interior, designed for prolonged comfort during sea voyages.
This model was constructed in 2014 by FERRETTI CUSTOM LINE in Cattolica and has been registered in Hong Kong since December of the same year. Exceptionally well-maintained and with a remarkably low count of engine hours, this vessel also boasts of a RINA Class certificate that holds valid till August 2029.
.Specifications
- Length
- 108' 4" (33m)
- Beam
- 24' 9" (7.52m)
- Max Draft
- 7' 3" (2.2m)
- Year built
- 2015
- Builder
- FERRETTI CUSTOM LINE
- Model
- Navetta 33
- Type
- Motor Yacht
- Cabins
- 10
- Sleeps
- 10
- Heads
- 6
- Hull material
- GRP
- Cruise speed
- 13 Knots
- Engines
- MAN D 2862 LE 463 1400hp 258hrs / MAN D 2862 LE 463 1400hp 257hrs
- Status
- Active
- MLS ID
- 483576
Introduction +
2015 Custom Line Navetta 33 Heritage | 32.6m | Tri-deck
Her semi-displacement hull was conceived from the outset for range, stability, and the kind of unhurried passage-making that turns a journey into an experience. At anchor or underway, the Navetta 33 Heritage delivers what Custom Line has always promised: the space and silence of a much larger yacht in a package that remains genuinely manageable.
Step aboard and the proportions surprise you. Three full decks of outdoor living. A main saloon flooded with natural light through oversized glazing. Five staterooms that accommodate up to ten guests in a layout that balances owner privacy with genuine guest comfort. And twin MAN V12 engines — each with barely 258 hours since new — that have barely been asked the question.
This is a yacht that has been used carefully and maintained properly. Her RINA class was last surveyed in Hong Kong in October 2025 and is current through August 2029.
For a buyer who understands value, that combination is increasingly rare.
Key Features +
Make & Model: Ferretti Group - Custom Line Navetta 33
LOA: 32.60m / 107ft
Beam: 7.00m
Depth: 2.90m
Gross Tonnage: 184 GT
Net Tonnage: 55 NT
Hull Material: GRP (Composite)
Hull Type: Semi-displacement
Built: 21 August 2014 — Ferretti S.p.A., Cattolica (RN), Italy
Classification: RINA — C ✶ HULL • MACH
Class valid until: 2029 | Last survey: 2025
Navigation: Unrestricted — intended to operate in any area and in any period of the year
Flag: Hong Kong
Service: Private use (Yacht)
Engines: 2 × MAN D2862 LE463 — V12, 1,029 kW each | Total power: 2,058 kW
Engine Hours: 258 / 257
Propulsion: Twin shaft, twin propellers
Generators: 2 × Kohler
Fuel Capacity: 15,000 L
Water Capacity: 3,000 L
Cruising Speed: 12–13 knots
Max Speed: 16 knots
Range: approx. 1,000 NM
Stabilisers: TRAC Fin (underway) + ARG Zero Speed (at anchor)
Cabins: 5 guest staterooms | Up to 10 guests
Crew: 4 crew cabins
Interiors +
Throughout the Navetta 33 interior you can feel the Custom Line's Atelier approach — quality materials, warm tones, and nothing out of place.
Five staterooms for up to ten guests, all en-suite, anchored by a full-beam master on the main deck. The saloon is bright and generous, opening directly to the aft cockpit through full-height sliding glass. An upper saloon adds a second living space for quieter moments.
Highlights:
- Full-beam master stateroom on main deck
- 5 guest staterooms | up to 10 guests | all en-suite
- Main saloon + upper saloon lounge
- Separate crew quarters | 4 crew cabins
Exteriors +
In the exterior, three outdoor deck levels across 32.6 metres, designed for life on the water.
The aft cockpit is the social hub, with direct access to the sea via the patented DMT transom — tender garage or beach platform at the touch of a button.
The flybridge adds a second al fresco entertaining area with a commanding helm position. Teak throughout, stabilisers at anchor and underway.
Highlights:
- Three deck levels — cockpit, flybridge, foredeck
- Patented DMT transom — tender garage / beach platform
- TRAC fin stabilisers + ARG zero-speed stabilisers
- Teak decking | Zuccon International Project exterior